Filter
Top Products
62
Reference
Main Menu:
Systm (System) Tab
Systm (System) Tab— controls system setting for beeper, speed fi lter, languages, system mode, simu-
lator controls, restores factory settings, and displays software version.
The following settings are available:
• Beeper— controls audible beep. Select from ‘Off’, ‘Alarms Only’ (sounds for alarms/messages), ‘Key
and Alarm’ (sounds for key presses and alarms/messages).
• Speed Filter— averages speed-readings. Choose from ‘Off’, ‘Auto’ (automatically controls fi ltering),
or ‘On’ (allows you to enter a value from 1 to 255 seconds).
• Language— select from various languages for the unit’s on-screen display (English, Danish, Finnish,
German, Italian, Swedish, Spanish, Portuguese, Norwegian, French, or Dutch).
• System Mode— select from ‘Normal’ (Normal Navigation) or ‘Simulator’ (For practice ONLY)
• Set Position*— allows to set your location while in simulator mode. See page 11, starting with step
2, for additional instructions.
• Track Control*— ‘Auto Track’ will steer to the current navigation point. ‘User Track’ allows you
to enter a heading in the ‘Track’ fi eld.
• Track*— lets you enter a heading.
• Speed*— lets you enter a speed.
• Transducer*— allows you to select a simulated transducer type.
* These fi elds will only appear when the unit is in Simulator Mode.
The following option is also available from the “Systm” tab:
• System Information— displays the unit’s software, basemap version and electronic serial number.
Press
MENU
for the following options:
• Defaults— restores settings on Systm page to default values.
• All Unit Defaults— restores all settings to Garmin’s original setup values for the entire unit.
Systm (System) Tab
Normal Mode
Simulator Mode
Retail Demo mode will
restore factory settings to the
unit if left unattended for
over 2 minutes. This mode
should only be used for
display purposes.
User waypoints will NOT be
deleted.
182C Manual Part 2.indd 62 6/4/2003, 2:54:17 PM