Filter
Top Products
55
Reference
Main Menu:
GPS Tab
To select a menu option:
1. Using the ARROW KEYPAD, highlight the desired option and press ENTER/MARK.
The following options are available:
• Start/Stop Simulator— toggles the unit simulator on or off. Retail Demo mode will restore factory
settings to the unit if left unattended for over 2 minutes. This mode should only be used for display
purposes. User waypoints will NOT be deleted.
• WAAS On/WAAS Off— toggles the WAAS capability of the receiver on or off.
• Track Up/North Up— allows you to select between a north up or track up sky view display for
the GPS Info display only.
• AutoLocate— allows the receiver to locate your position automatically. This process can take up
to fi ve minutes.
• Initialize Position— allows you to initialize the receiver graphically on the Map Page to initially help
the receiver acquire more quickly. See pages 4-5 for instructions on initialization.
• Set 2D Elevation— allows you to manually enter the elevation when in 2D or Simulator mode only.
Any elevation entered will be automatically calculated when the GPS is in 3D mode.
Note: If a DGPS receiver is attached to the unit and Garmin DGPS, RTCM In/NMEA Out,
or Other DGPS is enable on Port 2, WAAS will be automatically disabled (WAAS Off). It
is not possible for the GPSMAP 182/182C/232 to receive WAAS and DGPS corrections
at the same time.
GPS Tab Options
)
182C Manual Part 2.indd 55 6/4/2003, 2:54:12 PM