Filter
Top Products
Waypoint Definition Page
The last of the three waypoint management pages is
the waypoint definition page. This page lets you create
new waypoints manually, or review and edit existing
waypoints.
To create a new waypoint manually, you’ll need to
know its position coordinates or its distance and bear-
ing from an existing waypoint.
To create a waypoint by entering coordinates:
1. If a waypoint is currently displayed in the name field,
highlight ‘NEW?’ and press
F
. Then press the
L
key to clear the name field.
2. If a waypoint is not displayed, move the cursor to the
name field and enter the new waypoint’s name.
3. Use
U
and
D
to enter your waypoint name and
use
L
and
R
to move to the next character position.
4. Press
F
to confirm the waypoint name. The posi-
tion field will now become highlighted, with the receiv-
er’s last known position shown, if one exists.
5. Press
F
to begin entry of the position.
6. Use the
U
and
D
keys to enter your position, and
use the
L
and
R
keys to move to each character
field.
7. Press
F
to confirm and save your coordinates. The
default waypoint comment (UTC date and time of cre-
ation) will appear, and the highlight will move to
‘DONE?’.
8. Press the
F
key to return to the Menu Page.
Waypoint
Definition Page
REFERENCE
24
Use the waypoint definition
page to review, rename, or
delete stored waypoints and
to create new waypoints
manually.
To create a new waypoint
by manually entering coor-
dinates or by referencing an
existing waypoint, highlight
the ‘NEW?’ prompt and
press the ENTER key.
Waypoint
Name
Reference
Waypoint
Distance from
Reference
Waypoint
Position
Coordinates
Bearing from
Reference
Waypoint
Function Prompts
Waypoint Comment
125 Man Rev B 7/23/98 11:47 AM Page 24