Filter
Top Products
6-11
6.7 Waypoints
6.7.1 Entering waypoints
Maximum 100 waypoints, numbered 00 - 99, can be entered by the trackball, by latitude
and longitude, or at own ship position.
1. Press [NAV MENU], [4] and [2] in order. The following display appears.
[ENTER WPT]
1 [ENTER WPT, NAV LINE]
2 ENTER WPT CURSOR/L/L /OWN SHIP POSN
3 WPT NO. xx
xx°xx.xxxN/S
xxx°xx.xxxE/W
Figure 6-12 ENTER WPT menu
2. Press the [2] key several times to select CURSOR, L/L or OWN SHIP POSN whichever
is preferred, followed by the [ENTER] key.
3. Press the [3] key twice.
4. Do one of the following depending on option selected at step 2.
CURSOR: Operate the trackball to place the cursor at a location desired for waypoint.
L/L: POSN: Enter latitude followed by the [ENTER] key; enter longitude followed by
the [ENTER] key.
OWN SHIP POSN: No action at his stage.
5. Enter waypoint number in two digits and press the [ENTER] key.
6. To enter another waypoint, repeat steps 4 and 5.
6.7.2 The waypoint list
To display all registered waypoints, press [NAV MENU], [4] and [3]. Waypoint 00 through
09 are shown. Empty waypoints have all asterisks. To go to next page, press [0]. Pressing
[1] returns to previous page.