Filter
Top Products
35
Navigating to a cursor location
The Eagle View lets you navigation to a
location without storing it in the waypoint
database by using the plotter and cur-
sor. To do this, first switch to the plotter
screen. Now move the cursor to the lo-
cation that you want to navigate to. Next,
press the MENU key. A new menu ap-
pears on the list: “Go To Cursor”. Press
the right arrow key. The Eagle View
shows nav data to the cursor location
(shown as “D” on the plotter). See the
screen at the top of the next page.
NAVIGATION
Navigate To a Waypoint
The Eagle View makes it easy to navi-
gate to any waypoint. First, press the
WPT key, then press the right or left ar-
row keys until the desired waypoint ap-
pears. Now highlight the “Go To WPT#”
label and press the right arrow key. The
unit immediately returns to the naviga-
tion, plotter, or windows screen and
shows navigation information to the se-
lected location.
In this example, we recalled waypoint
number 2. Switching to a plotter screen
(shown at the top of the next page)
shows our starting location “S”, the re-
called waypoint “2”, and our present po-
sition.