Filter
Top Products
To arm the system and bypass the shock for just that one time, press button #1 on either remote to arm, then
within 10 seconds press Button #1 AGAIN. Siren will chirp 5 times and lights will flash 5 times.
ALARM OPERATION
VALET MODE:
To disable the Alarm functions of the system while still allowing door lock/unlock, turn the ignition ON and press the
override/program button until the dash LED turns on solid and you hear a siren chirp (about 5 seconds). Repeat the
process to exit valet mode (LED will turn off, lights flash twice, and chirps twice when exiting).
EMERGENCY OVERRIDE:
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to perform
an emergency override to disarm the system. Open the door with the key, (alarm will sound) turn the Ignition ON,
and press and hold the override/program button at least 5 seconds. The Alarm will disarm and enter the Valet
mode to allow you to use the vehicle. You can repair/replace the remote or see your installing dealer for assistance.
ALARM RANGE/STATUS CHECK: (2-Way Remote Only)
To perform a status check, or to test if you’re in range of your system, quickly press and hold Button #5 (C) for at
least 2 seconds. The remote control screen will display “CON”, and then show the current status of the vehicle i.e.
Armed, Disarmed, or Remote Started. If you do not receive the status of your vehicle, then you may be out of
range.
OPEN ZONE ALERT/BYPASS:
If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY ARMED, the siren will
chirp (4) times, give (4) light flashes, and the faulty zone will be automatically bypassed.
TRUNK POP - AUX CHANNEL #1: (Optional)
To pop the trunk or activate an auxiliary feature, press button #3 (Trunk Symbol) on either remote for at least 2
seconds. The 2-way remote will confirm with an audible alert and opening trunk icon on the LCD display. The trunk
pop feature is recommended for vehicles equipped with a Factory Electric trunk release. Extra parts and/or labor
may be necessary for this feature. If the system is armed, pressing Button #3 may or may not also disarm the
alarm system depending on programming option #14 configuration.
AUTOLOCK & UNLOCK WITH IGNITION: (Programmable)
The system is programmed to automatically lock when the ignition is turned on and unlock when the ignition is
turned off. Both the “Ignition Lock” and “Ignition Unlock” features can be turned ON or OFF individually through the
programming options of this system. See page 12.
ONE-TIME PASSIVE ARMING DISABLE:
To disable passive arming just one time, arm the system then quickly disarm within 10 seconds.