Filter
Top Products
41
ppoowweerr--uupp
This system will store its current state to non-volatile memory. If
power is lost and then reconnected the system will recall the
stored state from memory. This means if the unit is in override
mode and the battery is disconnected for any reason, such as
servicing the car, when the battery is reconnected the unit will
still be in override mode. This applies to all states of the system
including arm, disarm, and override mode.
ppoowweerr ssaavveerr mmooddee
Your system will automatically enter power saver mode while
armed or in override mode, after a period of time in which no
operation has been performed. This lowers the current draw on
the vehicle's battery. Power saver mode takes over under the
following conditions:
➤ Power saver when the system is armed: After the system has
been armed for 24 hours the LED will flash at half its
normal rate, decreasing the system's current draw.
➤ Power saver in override mode: When the system enters over-
ride mode the LED illuminates steadily. If the vehicle is not
used (ignition is not turned on) for a one hour period while
the system is in override mode, the LED will shut off. If the
system remains in override mode, the LED will come back
on the next time the ignition is turned on and then back off.