Filter
Top Products
27
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transceiver. Just
press for two seconds, and you will enter panic mode. The
siren will sound and the parking lights will flash. To stop panic
mode press on the transceiver again.
The transceiver will beep (or vibrate) continuously when the
system enters panic mode. The transceiver will not generate a
page notification when panic mode is exited.
override mode
You can prevent your security system from passive arming by
using override mode. This is very useful when washing the vehi-
cle or having it serviced. In override mode, the security system
will not arm, even with the transceiver, but all convenience func-
tions (door locks, trunk release, remote starting, etc.) will
continue to work normally.
To enter or exit override mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the override
switch within 10 seconds.
DRW-35
➜
note: Once panic mode has been entered, the siren will
sound for 30 seconds.
➜