Filter
Top Products
17
Page Recognition Mode
The transceiver will leave a zone icon illuminated when it has
received a triggered response and will wait for violation recogni-
tion. To clear the LCD information and alarm page alerts, turn
the ignition on and then off
uussiinngg yyoouurr ssyysstteemm
active arming
Press for one second to arm the system. The vehicle’s lights
will flash once, the doors will lock, the siren will chirp once, and
while the system is armed, the status LED will blink approxi-
mately once per second to indicate the system is actively
protecting the vehicle.
The transceiver will beep once (or vibrate). The arm icon (29)
will appear and remain displayed on the LCD.
Open Zone Notification
If the siren chirps again, the transceiver beeps again, and the
status LED blinks in a pattern, a protected entry or sensor input
is active and its icon will be displayed on the transceiver LCD.
This is called open zone notification. Refer to the Diagnostic
section of this manual for further information.
➜