Filter
Top Products
23
remote sensor bypass
Remote Sensor Bypass allows you to select which of the system's
inputs or sensors will be active and which will be bypassed when
the system is armed. (See Table of Zones section of this guide.)
Pressing (only in standard configuration) again within five
seconds of arming the system will activate the Remote Sensor
Bypass feature. Each press of will select a different security
level, and the transceiver will beep or vibrate once and the arm
icon (29) will flash on the LCD. The system will respond as
follows.
➤ Press once: The siren chirps once and the system is
armed.
➤ Press a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone 2 is now
bypassed.
➤ Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now
bypassed.
➤ Press a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➤ Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
➤ Continued pressing of will begin the Remote Sensor
Bypass cycle over again.
➜