Filter
Top Products
9
Button
The System Disarm/Unlock and the capability to silence the
alarm without disarming. These functions are controlled by
pressing this button for one second.
Button
Channel 2 output is controlled by pressing this button for three seconds.
Hold the button down continuously while accessing Channel 2 output.
Button
The panic feature is controlled by pressing this button for two
seconds. Press again to disable panic mode.
Button
The LCD backlighting will turn on when pressed for less than one
second; when held for more than five seconds the transceiver will
enter adjustment mode allowing the setting of the clock, timer
mode, and audible melody selection. For more information, please
refer to the Function Button Configurations section of this guide.
and Buttons
The remote engine start function of the system is controlled by
pressing these buttons simultaneously for one second.
and Buttons
When pressed simultaneously these buttons activate remote
engine start timer mode, engaging the remote engine start func-
tion every 24 hours.