Filter
Top Products
29
To remote start the vehicle:
1. Simultaneously press and on the transceiver for
one second.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. A remote start page notification with a unique melody (or
vibration) will be generated and the LCD will display the
remote start (19) icon as long as the vehicle is running.
4. In gasoline vehicles, the engine will start four seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the WAIT-TO-START indicator on the vehicle's
dash goes out.
5. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered. When using the Pro Security
Programmer, the run time can be programmed from 1-60
minutes.
note: The transceiver will generate a Page Notification
with a different unique two-tone beep (or vibrate) and
the remote start (19) icon will turn off when the remote
start shuts down.
important! (1) Never remote start your vehicle when the
keys are in the ignition, except when performing
Override Take-Over, and (2) Never start the vehicle if it
is not in either PARK or NEUTRAL.