Filter
Top Products
38
table of zones
A zone is represented by the LED flashes used by the system to
identify a particular type of input. Standard input assignments are
listed in the following table.
ZONE
(Number of
LED Flashes) DESCRIPTION
1 Instant trigger - hood pinswitch
2 Instant trigger - a heavier impact detected by the shock sensor
3 Door switch trigger
4 Instant trigger - for optional sensors
5 Ignition trigger
interpreting zone diagnostics
Warning responses are not reported by the arming or disarming
diagnostics. If you receive a open zone notification when arming
or a previous alarm notification when disarming, look at the
LED or transceiver LCD. Active or triggered zones will be indi-
cated by a pattern of blinks by the LED or the transceiver icon
will indicate the triggered zone.
Example
If Zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on and the door icon (9)
will be displayed on the transceiver.
➜
➜