Filter
Top Products
5.6.3.1 Smart Zoom settings
You can set how close Smart Zoom can zoom in when approaching the next turn
(Zoom-in limit), and the maximum zoom level to zoom out when the next turn is
further away (Zoom-out limit). The default values are set to be optimal in most cases.
5.6.3.2 Enable Overview mode
You can configure how the Overview mode is triggered when the next turn is at a
distance.
The Route event distance will determine when Clarion switches to the Overview or
back to the Navigation view.
The Overview zoom level will determine the fixed zoom level of the map in both
automatic and manually selected (by the Map orientation icon – see here: Page )
Overview modes. You can change the zoom level manually at any time (the Follow
button will not be displayed), but when you enter the Overview mode again, the
zoom level will be reset to this value.
33
You can also move the map in Overview mode. Then the Follow button will appear,
and when pushed, it will move the map to have your current position in the middle
again.
Note: when this automatic feature is disabled, you can still enable the Overview
mode manually as described here: Page . 33
5.6.3.3 Restore Lock-to-Position and Smart Zoom
As described at the hardware buttons and the map screen functions, you can move,
rotate, tilt and zoom the map during navigation. In these cases a Lock icon (Page )
appears on the screen.
32
As already mentioned, you can move, tilt and zoom the map during navigation. In
these cases a Lock icon (Page ) appears on the screen. 32
When you tilt or zoom the map, that part of Smart Zoom is automatically deactivated,
the map will still follow your position, but will not change the view parameter you
have modified. You can return to the full Smart Zoom mode by tapping the Follow
button.
If you move the map, all parts of Smart Zoom become deactivated, and the view
freezes. Tapping the Follow button makes Clarion follow your position again (Lock-
to-Position) and also re-enables Smart Zoom.
You can make Clarion push the Follow button for you automatically after a few
seconds of inactivity.
This functionality and the related parameters below apply to the Cockpit screen only.
The Map screen will wait for your action.
75