Filter
Top Products
5.1.5 Warn When Speeding
Maps may contain information about the speed limits of the road segments. Clarion
is able to warn you if you exceed the current limit. This information may not be
available for your region (ask your Clarion dealer) or may not be fully correct for all
roads in the map. This setting lets you decide whether you want to receive the
warnings or not.
Note: A blinking red exclamation mark will appear beside the speed limit sign every
time you exceed the speed limit independently of this adjustable speed warning.
5.1.5.1 Speeding tolerance
Clarion will warn you when you exceed the speed limit by the amount specified here.
Select whether you want to specify the tolerance as a Fixed value (offset to the
speed limit) or as a Percentage.
The slider will change depending on which mode you have chosen.
Both positive and negative values can be given in either offset or percentage mode.
5.1.5.2 Alternative speed limit
If the speed limit of the current road segment equals or is above this limit, the speed
warning will use the alternative tolerance instead of the previous one.
Move the slider to its rightmost position to turn off the alternative speed warning.
Then the settings of the upper slider will determine the warning for all roads.
5.1.5.3 Alternative speeding tolerance
If the speed limit of the current road reaches the value set at Alternative speed limit,
this setting will replace the basic one set at the top of this screen. The slider and the
selector work exactly as the basic ones described here: Page . 63
Example: to let you better understand how this feature works, here is an example. If
you use the settings +10 km/h – 100 km/h – +5%, Clarion will warn you when driving
at the following speeds:
63