Filter
Top Products
5.3.5 Attention Tone
If this is set to Disabled, the voice guidance will sound without a preceding attention
tone. Setting it to Single Tone will initiate a single attention tone before the voice
instructions. Setting it to Trigger Tone will initiate a trigger tone 1,5 seconds before
the voice instructions.
This trigger tone can be used to mute a car radio and to output the instructions via
the speakers of the car radio. In order to achieve this function, a suitable interface
adapter (to be purchased separately) that connects the headphone jack of the
navigation system with the car radio is required.
5.4 Route parameter settings
This is a very important page. Settings here determine how routes will be calculated.
This screen is directly accessible from the Route Information screen (Page ). 39
5.4.1 Method
Use the handle to set the speed of the route calculation. In the leftmost position the
route may not be optimal but the calculation will be very fast. Sliding it to the right will
result in more accurate routing in an increased amount of time.
Note: Since Clarion calculates routes very quickly, the position of this slide is only
used for long routes. Short routes are always calculated to give you the optimal
result independent of the slider.
5.4.2 Route
Here you can choose from three different route types.
5.4.2.1 Short
Choosing Short will result in a route that has the smallest total distance of all
possible routes between the given points. This is usually preferred by pedestrians,
cyclists or slow vehicles.
68