Cisco Systems 6500 Series Automobile Parts User Manual


 
1-13
Catalyst 6500 Series Supervisor Engine Guide
OL-7397-03
Chapter 1 Catalyst 6500 Series Switch Chassis Overview
Catalyst 6513-E
Supervisor Engine 32 and Supervisor Engine 32 PISA do not support the Switch Fabric Modules
(WS-C6500-SFM and WS-X6500-SFM2). The Switch Fabric Modules and Supervisor Engine
32 or
Supervisor Engine
32 PISA cannot be installed in the same chassis.
The uplink ports are fully functional on all redundant supervisor engine models when they are in
standby mode.
In systems with redundant supervisor engines, both supervisor engines must be the same model and have
the same daughter card configurations. Each supervisor engine must have the resources to run the switch
on its own, which means all supervisor engine resources are duplicated. Identical supervisor engine
memory configurations are recommended but are not required as long as the supervisor engine with the
smaller memory configuration is sufficient to run the configured features of the switch. Additionally,
each supervisor engine must have its own flash device and console port connections.
Additional information on the Catalyst 6513-E switch chassis including data sheets and chassis
installation is located at:
http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products_support_series_home.html