Filter
Top Products
2-6
Catalyst 6500 Series Supervisor Engine Guide
OL-7397-03
Chapter 2 Supervisor Engines
Supervisor Engine 2
PWR MGMT • Green—Sufficient power is available for all modules.
• Orange—There is insufficient power for all modules to power
up.
LINK
(Uplink ports)
• Green—The port is active (the link is connected and
operational).
• Flashing orange—The port failed diagnostics and is disabled.
• Orange—The port is disabled.
• Red—The supervisor engine is resetting; an overtemperature
condition has occurred.
Note If the supervisor engine fails to download code and
configuration information successfully during the initial
reset, the LED stays red; the supervisor engine does not
come online.
• Off—The port is not active or the link is not connected.
SWITCH LOAD If the switch is operational, the switch load bar meter indicates (as
an approximate percentage) the current traffic load over the
backplane.
PCMCIA Green—The installed Flash PC card is being accessed and is
performing either a read or a write operation.
1. VTT = voltage termination module. The VTT module terminates signals on the Catalyst switching bus.
2. If no redundant supervisor engine is installed and there is a VTT module minor or major overtemperature condition,
the system shuts down.
Table 2-4 Supervisor Engine 2 Front Panel LEDs (continued)
LED Color and Meaning