Filter
Top Products
DISP (Display): Press this knob to switch between
time, temperature, and the elapsed time of the
track. To change the default display (CD#/Track#/
Time, CD#/Track#/Temperature, or Track#/Elapsed
Time/Temperature), press the knob until the
desired option displayed, then hold the knob for
two seconds. The radio produces one beep and
the selected display becomes the default.
AUTO TONE/AUTO EQ (Automatic
Equalization): Press this button to select the
desired equalization setting while playing a CD.
The equalization is set whenever a CD is played.
For more information, see “AUTO TONE” or
“AUTO EQ” listed previously in this section.
BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD(s) remains
inside the radio for future listening.
SRCE (Source): Press this button to play a CD
or to access the remote device, when listening
to the radio.
Using Song List / R Mode
The six-disc CD changer has a feature called song
list. This feature is capable of saving 20 track
selections.
To save tracks into the song list feature, perform
the following steps:
1. Turn the radio on and load it with at least
one CD. See “LOAD” listed previously in
this section for more information.
2. Check to see that the CD changer is not in
song list mode. S-LIST should not display.
If S-LIST is displayed, press the SONG LIST
button to turn it off.
3. Select the desired CD by pressing the
numbered pushbutton and then use the SEEK
left arrow to locate the track to be saved. The
track begins to play.
4. Press and hold the song list button for two or
more seconds to save the track into memory.
When song list is pressed, one beep sounds.
After two seconds of pressing song list
continuously, two beeps sound to confirm that
the track has been saved and TRACK number
ADDED displays.
5. Repeat Steps 3 and 4 for saving other
selections.
255