Filter
Top Products
Adjusting the Speakers (Balance/Fade)
BAL/FADE / S(Balance/Fade): To adjust
the balance between the right and the left speakers,
push and release the balance and fade button until
BAL (balance) displays. Turn the ADJ (adjust) knob
to move the sound toward the right or the left
speakers.
To adjust the fade between the front and rear
speakers, push and release the balance and fade
button until FADE displays. Turn the ADJ knob to
move the sound toward the front or the rear
speakers.
To adjust balance or fade to the middle position,
select BAL or FADE. Then press and hold
the balance and fade button for more than
two seconds. The display level adjusts to the
middle position and a beep sounds.
To adjust both speaker controls to the middle
position, press and hold the tone button when no
speaker control is displayed. ALL CENTERED
displays and a beep sounds.
Finding a Program Type (PTY) Station
(RDS and XM™)
To select and find a desired PTY perform the
following:
1. Press the P-TYPE button to activate program
type select mode. PTY for FM or PTYPE for
XM and a program type displays.
2. Turn the ADJ knob to select a PTY.
3. Once the desired PTY displays, press the
SEEK up arrow to select and go to the
PTY’s first station.
4. To go to another station within that PTY press
the SEEK up arrow again. If the radio cannot
find the desired PTY, NONE FOUND
displays and the radio returns to the
last station you were listening to.
5. Press P-TYPE to exit program type
select mode.
If PTY times out and no longer displays, go
back to Step 1.
If both P-TYPE and TRAF are on, the radio
searches for stations with the selected PTY and
traffic announcements.
249