Filter
Top Products
Setting the Time for Radios with
Radio Data Systems (RDS)
To set the hour, press the clock button. The clock
symbol appears on the display and the hour
number flashes. Turn the ADJ (adjust) knob to
increase or to decrease the hours. To set the
minutes, press the clock button again. The minute
numbers flashes. Turn the ADJ knob to increase or
to decrease the minutes. The time can be set with
the ignition on or off.
To synchronize the time with an FM station
broadcasting Radio Data System (RDS)
information, press and hold the clock button to
enter the clock set mode, then press and hold the
clock button for three seconds until UPDATED
displays. If the time is not available from the
station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning
to an RDS broadcast station, it can take a few
minutes for the time to update.
Radio with CD (Base Level)
Playing the Radio
O
(Power): Press this knob to turn the system
on and off.
u(Volume): Turn this knob clockwise or
counterclockwise to increase or to decrease the
volume.
United States shown, Canada similar
229