Filter
Top Products
Disarming the System
You can disarm the system by doing any one of
the following:
• Press the remote keyless entry transmitter
unlock button.
• Turn the ignition on.
• Turn the driver’s door key lock cylinder
counterclockwise.
Once the system is disarmed, the security light will
stop flashing.
How the System Alarm is Activated
If the system is armed, it can be activated
by either:
• Opening the driver’s door or liftgate
(MAXX model). This will cause a ten second
pre-alarm chirp followed by a thirty second full
alarm of horn and lights.
• Opening any other door. This will immediately
cause a full alarm of horn and lights for
thirty seconds.
When an alarm event has finished, the system will
re-arm itself automatically.
How to Turn Off the System Alarm
To turn off the system alarm, do one of the
following:
• Press the lock button on the remote keyless
entry transmitter. The system will then
re-arm itself.
• Press the unlock button on the remote
keyless entry transmitter. This will also
disarm the system.
• Insert the key in the driver’s door key lock
cylinder and turn it counterclockwise. This
will also disarm the system.
• Insert the key in the ignition and turn it on.
This will also disarm the system.
How to Detect a Tamper Condition
If you hear three chirps when you press the unlock
or lock buttons on the remote keyless entry
transmitter, it means that the content theft security
system alarm was triggered previously.
117