Filter
Top Products
/(Remote Start): If your vehicle has the remote
start feature, the keyless entry transmitter will
have a button with this symbol on it.
To start the vehicle using the remote start feature,
do the following:
1. Aim the transmitter at the vehicle.
2. Press and release the transmitter’s lock
button, then immediately press and hold
the transmitter’s remote start button until the
vehicle’s turn signal lights flash.
3. When the vehicle starts, the parking lamps
will turn on and remain on while the engine
is running.
The engine will shut off automatically after
10 minutes, unless a time extension has been
done, or the vehicle’s key is inserted into
the ignition switch and turned to ON.
If you enter the vehicle after a remote start,
and the engine is still running, insert the
key into the ignition switch and turn it to ON to
drive the vehicle.
4. To manually shut off a remote start, do any of
the following. The parking lamps will turn off.
• Aim the remote keyless entry transmitter
at the vehicle, and press the remote
start button.
• Turn on the hazard warning flashers.
• Turn the ignition switch to ON and then
to OFF.
If only one remote start procedure has been done,
since last driving the vehicle or resetting the
remote start system, the engine may be started
again remotely by following the remote start
procedure a second time.
If the remote start procedure is used again before
the first 10 minute time frame has ended, the
first 10 minutes will immediately expire and
the second 10 minute time frame will start.
105