Chevrolet 2007 MALIBU Automobile User Manual


 
Setting Preset Stations
Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped)), can be
programmed on the six numbered pushbuttons,
by performing the following steps:
1. Turn the radio on.
2. Press BAND to select FM1, FM2, AM, or XM1
or XM2.
3. Tune in the desired station.
4. Press AUTO TONE (automatic tone) or
AUTO EQ (automatic equalization) to
select the equalization.
5. Press and hold one of the six numbered
pushbuttons until a beep sounds. When that
numbered pushbutton is pressed, the station
that was set, returns and the equalization that
was selected is stored for that pushbutton.
6. Repeat the steps for each pushbutton.
Setting the Tone
(Bass/Midrange/Treble)
TONE /P/Q (Bass/Treble): Press and release
this button until BASS, MID (midrange), or TREB
(treble) displays. Turn the ADJ knob to increase or
to decrease the tone. The display shows the bass,
midrange, or treble level. If a station is weak or has
static, decrease the treble.
To adjust bass, midrange, or treble to the middle
position, select BASS, MID, or TREB. Then
press and hold the tone button for more than
two seconds. One beep sounds and the tone
control adjusts to the middle position.
To adjust all tone controls to the middle position,
press and hold the tone button while no tone control
displays. ALL CENTERED displays and a beep
sounds. The bass, midrange, and treble adjusts to
the middle position.
AUTO TONE/AUTO EQ (Automatic
Equalization): Press this button to select
customized equalization settings designed for
country, jazz, talk, pop, rock, and classical.
To return to the manual mode, press the AUTO
TONE or AUTO EQ button until CUSTOM displays.
You can also manually adjust the bass, midrange,
and treble using the tone button.
238