3-90
90 | Printing with Epson Drivers for Macintosh
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper
options as the
Paper Size setting, as described on page 80. In addition, you
need to check these settings for various cutting and feeding options.
1. Select
Roll Paper Option from the drop-down menu. You see this
screen:
2. Choose one of the following
Auto Cut settings:
•Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between the images and trims each
print individually. This provides the cleanest edge for borderless
printing.
• Single Cut causes the images to be printed end-to-end and saves
paper (when you are printing multiple images). With borderless
printing, you may see a sliver of the previous or next image. You will
see a white margin between print jobs.
•Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, use the auto take-up reel, or if you are
printing on heavy media that must be cut by hand.
See page 60 for instructions on using the button to operate the
cutter. See page 49 for a list of media that are not recommended for
use with the built-in cutter.
Normal
cut
Single
cut
Double
cut
