A SERVICE OF

logo

1-25
Setting Up the Printer | 25
Unpacking the Auto Take-Up Reel
Make sure you have all the items shown below.
Installing the Auto Take-up Reel
1. Attach the drive unit to the right side of the support bar as shown below,
and use the large screws to secure the drive unit.
Drive unit
Movable unit
Right paper stop
(for drive unit)
Left paper stop
(for movable unit)
Reflector
Movable unit stopper
64-inch wide 3-inch core
2 large screws,
4 small screws
2 cable clamps
Drafting
tape