A SERVICE OF

logo

Open as PDF
next previous
2-59
Handling Paper and Other Media | 59
3. Wind up the paper and roll it onto the rails.
4. Have two people lift the paper out of the printer and place it on a flat
surface.
5. Hold the black paper stop as shown and remove it from the spindle. If
necessary, lightly tap the spindle to loosen the paper stop.
6. Remove the roll paper from the spindle.
After rewinding the roll, carefully place it in the bag and box that it came in.
WARNING: Make sure
you have two people lift
the roll, handling it by the
paper stops at both ends.
Caution: Do not strike
the paper stop on the
floor to remove the
paper, or the spindle
might be damaged.