A SERVICE OF

logo

Open as PDF
next previous
2-65
Handling Paper and Other Media | 65
4. Press d to feed the paper.
5. Pull the paper around the back of the take-up reel core and use three
pieces of tape to attach the paper to the core.
6. Press d to feed the paper and create some slack.
7. Hold down the
Auto Backward button on the control panel to rotate
the take-up reel and wind a small length of paper. Make sure there is
enough slack between the paper and the take-up reel core.
8. When you’re ready to print, make sure Auto Cut is set to
Off in the
printer driver.
9. Press the
Auto Backward button on the control panel, then send your
print job to the printer.