A SERVICE OF

logo

Open as PDF
next previous
1-33
Setting Up the Printer | 33
Installing Ink
Use the ink cartridges that came with your printer for initial ink charging.
During the initial installation process, it is normal for up to one-third of the
ink in each cartridge to be used.
1. Press the P Power button to turn on the printer.
2. When the ink status lights start flashing and the ink covers pop open,
open the covers all the way. You may need to press the ink cover buttons
to open the covers.
3. Remove each ink cartridge from its package and gently shake the
cartridge.
Note: The cartridges
shipped with your printer
contain approximately
110 ml of ink and are
provided mainly to charge
the ink system. Make
sure you order a set of
700 ml cartridges as soon
as possible.
Ink status
lights