2-71
Handling Paper and Other Media | 71
Loading Small Cut Sheets or Fine Art Paper
You can load paper without releasing the paper lever. This prevents
scratching that might damage fine art paper, and is also easier, especially
when you are loading small sheets.
1. Make sure the printer is on and the roll paper cover is closed.
2. Press l until appears on the LCD display.
3. Make sure the paper lever is in the locked position.
4. Feed the sheet into the paper slot until it stops. Make sure the right edge
of the paper is straight and aligned with the scale on the roll paper cover.
5. Press the Pause button. The sheet feeds into printing position
automatically.
6. When you see a question on the display about the type of media you
want to use, select
Yes if the media is correct, or select No, then change
the setting and press .
7. Print your page. After it is finished, the sheet stays in the printer.
8. To remove your print, press the d button or release the paper lever
while holding the printed sheet.
