6-153
Solving Problems | 153
MAINTENANCE REQUEST A printer part may need to
be replaced soon.
Note the code number and contact Epson as
described on page 10.
MAINTENANCE TANK
NEARLY FULL
The indicated tank is
almost full.
Although you can continue printing, you should
replace the tank as soon as possible.
NO CARTRIDGE
INSTALL INK CARTRIDGE
Ink cartridge(s) not
installed.
Install ink cartridge(s); see page 133.
NO MAINTENANCE TANK
INSTALL THE XXX
MAINTENANCE TANK
The indicated maintenance
tank is not installed.
Make sure the maintenance tank is fully
inserted; see page 141.
NOT ENOUGH CAPACITY
REPLACE THE XXX
MAINTENANCE TANK
The indicated tank is
almost full.
Although you can continue printing, you should
replace the tank as soon as possible.
NOT ENOUGH INK
REPLACE INK CARTRIDGE
WITH A NEW ONE
The ink cartridge is nearly
expended.
Replace the ink cartridge; see page 133.
NOZZLE CHECK ERROR
PRESS THE BUTTON
Nozzle check cannot be
executed.
Press the Pause button to clear the error,
then try the nozzle check again. Or cancel the
nozzle check from the computer and restart the
printer.
PAPER CUT ERROR
PRESS THE MENU BUTTON
TO MOVE THE CUTTER TO
REPLACEMENT POSITION
Roll paper was not cut
correctly.
Release the paper lever and cut the paper
manually. Reload paper if necessary.
PAPER CUT ERROR
REMOVE UNCUT PAPER
Roll paper was not cut
correctly.
The cutter may be blunt.
Release the paper lever and cut the paper
manually. Reload paper if necessary.
Reinstall or replace the cutter blade if
necessary; see page 138.
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
Paper remains in the
printer.
Release the paper lever and remove the paper.
PAPER ERROR
LOAD PAPER PROPERLY
Paper is not loaded
correctly.
Release the paper lever and reload paper.
PAPER LOW The paper roll is almost
finished.
Replace the roll paper.
Message Explanation Response
