A SERVICE OF

logo

5-147
Maintaining and Transporting the Printer | 147
5. Remove the printer from the stand. First make sure the front casters are
locked.
6. Remove the four wing nuts and lock washers securing the printer to the
stand (underneath the printer). Keep them in a safe place.
7. Lift the printer using the hand grips where provided. (See the stickers
located near the rear hand grips for the correct holding position.)
8. Keep the printer level while moving it. See page 148 for information
about setting up the printer after transporting it.
To ship the printer a longer distance, you should repack it using the original
box and packing materials.
WARNING: Do not attempt
to lift the printer with fewer
than 4 people.