Filter
Top Products
2 - 19
SPEC
TIGHTENING TORQUES
Exhaust pipe and exhaust valve Bolt M6 4 10 1.0 7.2
Exhaust valve and housing Bolt M6 3 10 1.0 7.2
EXUP pulley and arm shaft Bolt M5 2 5 0.5 3.6
Exhaust joint Bolt M4 4 3 0.3 2.2
Exhaust valve pipe Bolt M8 1 20 2.0 14
Air induction system pipe Clamp — 4 3.5 0.35 2.5
Crankcase (cylinder head) Stud bolt M10 10 10 1.0 7.2
E
Crankcase (upper and lower) Bolt M9 10 See NOTE.
E
Crankcase (upper and lower) Bolt M6 2 14 1.4 10
E
Crankcase (upper and lower) Bolt M6 14 12 1.2 8.7
E
Crankcase (upper and lower) Bolt M8 2 24 2.4 17
E
AC magneto cover Bolt M6 9 12 1.2 8.7
Drive sprocket cover Bolt M6 2 10 1.0 7.2
Drive sprocket cover Bolt M6 1 10 1.0 7.2
LT
Plate Bolt M6 1 10 1.0 7.2
Clutch cover Bolt M6 8 12 1.2 8.7
Pick up rotor cover Bolt M6 8 12 1.2 8.7
Shift shaft cover Bolt M6 5 12 1.2 8.7
Breather plate Bolt M6 5 10 1.0 7.2
LT
Timing mark accessing screw Bolt M8 1 15 1.5 11
Starter clutch idle gear shaft Bolt M6 1 10 1.0 7.2
Starter one-way clutch Bolt M6 3 12 1.2 8.7
LT
Clutch boss Nut M20 1 105 10.5 76
Use a lock
washer.
Clutch spring Bolt M6 6 8 0.8 5.8
Drive sprocket Nut M22 1 85 8.5 61
Use a lock
washer.
Main axle bearing housing Screw M6 3 12 1.2 8.7
LT
Shift lever stopper Bolt M6 2 10 1.0 7.2
LT
Stopper screw Screw M8 1 22 2.2 16
LT
Shift rod Nut M6 1 6.5 0.65 4.7 Left thread
Shift rod Nut M6 1 6.5 0.65 4.7
Shift rod joint Bolt M6 1 10 1.0 7.2
LT
Shift arm Bolt M6 1 10 1.0 7.2
AC magneto stator coil Screw M6 3 14 1.4 10
LT
ECU Screw M6 2 7 0.7 5.1
Neutral switch — M10 1 20 2.0 14
Pick up coil Bolt M6 2 10 1.0 7.2
LT
Thermo unit — M12 1 18 1.8 13
Item Fastener
Thread
size
Q’ty
Tightening
torque
Remarks
Nm m·kg ft·lb
LT