Filter
Top Products
4 - 72
CHAS
SWINGARM AND DRIVE CHAIN
EAS00704
REMOVING THE DRIVE CHAIN
1. Stand the motorcycle on a level surface.
WARNING
_
Securely support the motorcycle so that
there is no danger of it falling over.
NOTE:
_
Place the motorcycle on a suitable stand so
that the rear wheel is elevated.
2. Remove:
• drive chain
(with the drive chain cutter)
NOTE:
@
Only cut the drive chain if it or the swingarm is
to be replaced.
EAS00707
CHECKING THE SWINGARM
1. Check:
• swingarm
Bends/cracks/damage
→
Replace.
2. Check:
• pivot shaft
Roll the pivot shaft on a flat surface.
Bends
→
Replace.
WARNING
_
Do not attempt to straighten a bent pivot
shaft.