Filter
Top Products
5 - 39
ENG
PICKUP COIL
2. Tighten:
• pickup coil rotor bolt 1
NOTE:
@
While holding the generator rotor 2 with the
rotor holding tool 3, tighten the pickup coil
rotor bolt.
Rotor holding tool
YU-01235
T
R
.
.
60 Nm (6.0 m · kg, 43 ft · lb)
3. Apply:
• sealant
(onto the crankshaft position sensor lead
grommet)
Quick Gasket
®
ACC-11001-05-01
4. Install:
• pickup coil rotor cover
• pickup coil lead holder
• clutch cable holder
NOTE:
@
• When installing the pickup coil rotor cover,
align the timing chain guide (intake side) pin
1 of the with the hole 2 in the pickup coil
rotor cover.
• Tighten the pickup coil rotor cover bolts in
stages and in a crisscross pattern.