Filter
Top Products
3 - 64
CHK
ADJ
CHECKING THE FUSES
3. Replace:
• blown fuse
▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Set the main switch to “OFF”.
b. Install a new fuse of the correct amperage
rating.
c. Set on the switches to verify if the electrical
circuit is operational.
d. If the fuse immediately blows again, check
the electrical circuit.
WARNING
_
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the lighting and
ignition systems to malfunction and could
possibly cause a fire.
▲▲▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
4. Install:
• front cowling inner panel (left)
Refer to “COWLINGS”.
• rider seat
Refer to “SEATS”.
Fuses
Amperage
rating
Q’ty
Main 50 A 1
Fuel injection
system
15 A 1
Headlight 20 A 1
Signaling system 15 A 1
Ignition 15 A 1
Back up
(odometer and
clock)
5 A 1
Radiator fan motor 15 A 1
Reserve 20 A 1
Reserve 15 A 1
Reserve 5 A 1