3 - 6
CHK
ADJ
FUEL TANK
INSTALLING THE FUEL PUMP
1. Install:
• fuel pump
NOTE:
• Do not damage the installation surfaces of
the fuel tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump as shown in the illustra-
tion.
• Tighten the fuel pump bolts in stages in a
crisscross pattern and to the specified
torque.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
INSTALLING THE FUEL HOSE
1. Install:
• fuel hose
• fuel hose holders
CAUTION:
When installing the fuel hose, make sure
that it is securely connected, and that the
fuel hose holders are in the correct posi-
tion, otherwise the fuel hose will not be
properly installed.