Filter
Top Products
Periodic maintenance and adjustment
72
PZ50 / PZ50RT / PZ50GT / PZ50MT
PZ50VT
4. Unhook the bulb holder by pushing it in,
then downward.
5. Remove the bulb.
6. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
[ECS00621]
7. Install the bulb holder cover, and then
connect the headlight coupler.
8. Install the top cover (PZ50 / PZ50RT /
PZ50GT / PZ50MT) or close the shroud
(PZ50VT).
ESU12280
Adjusting the headlight beams
Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
● Direction (a): Down and to the left
● Direction (b): Up and to the right
● Direction (c): Down and to the right
● Direction (d): Up and to the left
1. Headlight coupler
2. Bulb holder cover
1. Headlight coupler
2. Bulb holder cover
1. Bulb holder
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
U8GK12E0.book Page 72 Monday, May 19, 2008 11:17 AM