Filter
Top Products
Operation
43
WARNING
EWS00321
● Make sure that the throttle lever is fully
released and the snowmobile is at a full
stop before shifting.
● Be sure to press the drive select switch
only while the engine is idling.
● Make sure that the reverse “R” indicator
light comes on and remains on, and that
the area behind the snowmobile is clear
before reversing. Watch behind.
● Reduce speed and avoid sharp turning
when operating the snowmobile in re-
verse.
TIP
The reverse buzzer beeps while the transmis-
sion is in reverse.
2. Release the parking brake by moving the
parking brake lever to the right.
3. Press the throttle lever slowly to move the
snowmobile.
4. Turn the handlebar in the desired direc-
tion.
5. Squeeze the brake lever to stop the
snowmobile.
6. Apply the parking brake by moving the
parking brake lever to the left.
ESU11411
Stopping the engine
● Turn the main switch to the off position to
stop the engine.
● Push down the engine stop switch to stop
the engine in an emergency.
ESU11430
Transporting
When transporting your snowmobile on a trail-
er or in a truck, observe the following recom-
mendations to help protect it from damage:
● If transporting the snowmobile in an open
trailer or truck, put a tight fitting cover on the
snowmobile. A cover specifically designed
for your snowmobile is best. This will help
keep foreign objects out of the cooling
vents, and also help protect the snowmo-
bile against damage from debris on the
road.
● If transporting the snowmobile in an open
trailer or truck in areas where road salt is
used, coat metal suspension surfaces light-
ly with oil or another protectant. This will
1. Off
U8GK12E0.book Page 43 Monday, May 19, 2008 11:17 AM