Filter
Top Products
Control functions
21
ESU10751
Drive guard
WARNING
EWS00401
● Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
● Make sure that the drive guard is tight-
ened securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
NOTICE
ECS00830
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.
ESU10770
V-belt holder (PZ50VT)
Keep a spare V-belt for emergency use by
placing it into the V-belt holder provided.
NOTICE
ECS00190
Make sure that the V-belt is installed se-
curely in the holder.
1. Right upper cover
2. Right side cover
3. Right lower cover
1. Air filter case cover
1. Drive guard
1. V-belt holder
U8GK12E0.book Page 21 Monday, May 19, 2008 11:17 AM