Filter
Top Products
Control functions
12
● a digital speedometer (which shows the
riding speed)
● an odometer (which shows the total dis-
tance traveled)
● a tripmeter (which shows the distance trav-
eled since it was last set to zero)
● an engine speed meter (which shows the
engine speed; not for use while riding)
● warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)
● indicator lights [which show high beam, low
coolant temperature, transmission position
(PZ50RT / PZ50GT / PZ50MT / PZ50VT),
and knock control system conditions]
● a warning light (which shows warnings to-
gether with the warning indicators)
● a fuel meter (which shows the fuel remain-
ing in the fuel tank)
● a grip/thumb warmer level indicator (which
shows the grip warmer or the thumb warm-
er level)
When the key is turned to the on position, the
warning light, the low coolant temperature in-
dicator light, the knock control system “KCS”
indicator light, the drive “D” and reverse “R” in-
dicator lights (PZ50RT / PZ50GT / PZ50MT /
PZ50VT), and all segments of the meter dis-
play come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and engine
speed meter modes
Pushing the “SELECT” button switches the
display between the odometer mode “ODO”,
tripmeter mode “TRIP”, and engine speed
meter mode “r/min”.
To reset the tripmeter, push the “RESET” but-
ton for at least 1 second while the tripmeter is
displayed.
1. Warning light “”
2. Low coolant temperature indicator
light “”
3. Knock control system “KCS” indicator light
4. Drive “D” indicator light (PZ50RT /
PZ50GT / PZ50MT / PZ50VT)
5. Reverse “R” indicator light (PZ50RT /
PZ50GT / PZ50MT / PZ50VT)
6. Meter display
1. “SELECT” button
2. “RESET” button
U8GK12E0.book Page 12 Monday, May 19, 2008 11:17 AM