Filter
Top Products
Periodic maintenance and adjustment
49
ESU13001
Tool kit
The service information included in this man-
ual and the tools provided in the owner’s tool
kit are intended to assist you in the perfor-
mance of preventive maintenance and minor
repairs. However, additional tools such as a
torque wrench may be necessary to perform
certain maintenance work correctly.
NOTICE
ECS00780
Before starting the engine, make sure that
the tool kit is securely fastened (PZ50 /
PZ50RT / PZ50GT / PZ50MT) and that the
storage pouch zipper is completely
closed.
TIP
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU11763
Removing and installing the
shroud and covers
WARNING
EWS00091
Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.
Shroud, front cover, and air filter case
cover
To open the shroud and remove the front cov-
er and air filter case cover
1. Unhook the latch, and then slide the front
cover upward (PZ50 / PZ50RT /
PZ50GT / PZ50MT).
Unhook the shroud latches, and then
slowly raise the shroud forward until it
stops (PZ50VT).
2. Loosen the fasteners, lift up the air filter
case cover slightly, and then unhook the
cover from the air filter case to remove it.
PZ50 / PZ50RT / PZ50GT / PZ50MT
PZ50VT
1. Tool kit
1. Latch
2. Front cover
3. Air filter case cover
4. Fastener
1. Shroud latch
2. Shroud
U8GK12E0.book Page 49 Monday, May 19, 2008 11:17 AM