Filter
Top Products
Control functions
19
● Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.
ESU10550
Brake lever
The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.
TIP
When the brake lever is operated, the brake
light will illuminate.
NOTICE
ECS00060
Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU10712
Shroud latches (PZ50VT)
WARNING
EWS00082
Be sure the shroud is secured before op-
eration. A loose shroud could move and
cause loss of control.
To open the shroud, unhook the shroud latch-
es, and then slowly raise the shroud forward
until it stops. When closing the shroud, slowly
lower it to its home position, and then hook the
shroud latches.
Maximum rated capacity:
DC 12 V, 2.5 A (30 W)
1. Brake lever
1. Parking brake lever
U8GK12E0.book Page 19 Monday, May 19, 2008 11:17 AM