Filter
Top Products
33
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Important Refer to your engine operator’s manual for additional maintenance procedures.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours
• Check the fan and alternator belt tension.
• Torque the wheel lug nuts.
• Change the transmission fluid.
• Replace the transmission filter.
After first 50 hours
• Replace the engine oil and filter.
• Check the engine RPM (idle and full throttle).
Every 50 hours
• Check the battery fluid level.
• Check the battery cable connections.
• Lubricate all grease fittings.
• Inspect the air filter, dust cup, and baffle.
Every 100 hours
• Check the fan and alternator belt tension.
• Inspect the cooling system hoses.
Every 150 hours • Replace the engine oil and filter.
Every 200 hours
• Torque the wheel lug nuts.
• Drain moisture from the hydraulic tank.
• Drain moisture from the fuel tank.
• Check the reel bearing preload.
• Lubricate the front axle bearings.
Every 400 hours
• Service the air cleaner (when the indicator shows red).
• Replace the fuel/water separator filter.
• Replace the fuel filter.
• Inspect the traction linkage movement.
• Check the engine RPM (idle and full throttle).
Every 800 hours
• Change the hydraulic filter.
• Change the transmission fluid.
• Replace the transmission filter.
• Check rear wheel toe-in.
• Pack the bearings to both rear wheels (2WD).
• Change the rear axle lubricant (4WD).
• Adjust the valves (Kubota diesel engine).
Every 1600 hours or 2
years, whichever occurs
first
• Replace all moving hoses.
• Replace the interlock safety switches.
• Flush/replace the cooling system fluid.
• Drain/flush the fuel tank.
• Drain/flush the hydraulic tank.