Filter
Top Products
19
Installing the Rear Weight
The Reelmaster 5200-D & 5400-D Traction Units comply with CEN standard EN 836:1997, ISO standard 5395:1990, and
ANSI B71.4-1999 Standards when equipped with rear weight and 90 lb. of calcium chloride ballast is added to rear wheels.
Use chart below to determine combinations of weight required. Order parts from your local Authorized Toro Distributor.
Rear Weight
Required
Weight Part
Number
Weight Description Qty.
2wd Traction Unit with ROPS
w/o baskets
291 lb. 75-6690 Rear Weight Kit 3
2wd Traction Unit with ROPS
with baskets
358 lb. 75-6690 Rear Weight Kit 4
2wd Traction Unit w/o ROPS
w/o baskets
157 lb. 75-6690 Rear Weight Kit 1
2wd Traction Unit w/o ROPS
with baskets
224 lb. 75-6690 Rear Weight Kit 2
4wd Traction Unit with ROPS
w/o baskets
157 lb. 75-6690 Rear Weight Kit 1
4wd Traction Unit with ROPS
with baskets
249 lb.
75-6690
98-9780
Rear Weight Kit
Rear Weight Kit—25 lb.
2
1
Important If a puncture occurs in a tire with calcium chloride, remove unit from turf area as quickly as possible. To
prevent possible damage to turf, immediately soak affected area with water.