Filter
Top Products
This symbol is on
the accessory
inflator switch.
There may be an accessory inflator kit stored
in the rear compartment on the passenger’s
side. It includes a 20-foot (6 m) hose with an
air pressure gage and nozzle adapters.
{CAUTION:
Inflating something too much can make
it explode, and you or others could be
injured. Be sure to read the inflator
instructions, and inflate any object only
to its recommended pressure.
To use your accessory inflator system, do the
following:
1. Turn the ignition to ACCESSORY or RUN.
2. Attach the appropriate nozzle adapter, if
required, to the end of the hose that has
the pressure gage.
3. Attach that end of the hose to the object you
wish to inflate.
4. Remove the protective cap covering the outlet.
5. Attach the other end of the hose to the outlet.
6. Press the accessory inflator switch. The light
in the switch will come on to show the
system is working.
481