Filter
Top Products
Arming with the Power Lock Switch
Your alarm system will arm when the key is
removed from the ignition and you use the driver’s
power door lock switch, with the driver’s door
open or the passenger’s door power door
lock switch with the passenger’s door open to lock
the vehicle. If you would like to turn on power
door lock switch arming, see DIC Vehicle
Personalization (Uplevel Only) on page 261.
When the security light flashes quickly the system
is arming. After all doors and the liftgate are
closed and locked, the security light will begin
flashing at a very slow rate to let you know
the system is armed.
Arming with the Remote Keyless Entry
Transmitter
Your alarm system will arm if the key is not in the
ignition and you use your remote keyless entry
transmitter to lock the doors. The security light will
flash to let you know the system is arming. If
you press the transmitter’s lock button twice within
five seconds, the horn will sound. After all doors
and the liftgate are closed and locked, the security
light will begin flashing at a very slow rate to let
you know the system is armed.
Arming with Your Key
Your alarm system will arm when you use your
key to lock the driver’s door. The security light will
flash to let you know the system is arming.
After all doors and the liftgate are closed and
locked, the security light will begin flashing at a
very slow rate to let you know the system is
armed. If you would like your key not to arm the
system, see DIC Vehicle Personalization
(Uplevel Only) on page 261.
134