Remote Power Sliding Door Operation
+
(Power Sliding Door): If your vehicle
has one power sliding door, the remote keyless
entry transmitter will have a button with a van
symbol on it. Press and hold this button to open or
close the power sliding door. See Power Sliding
Door (PSD) on page 121.
*+ (Dual Power Sliding Doors): If your
vehicle has dual power sliding doors, your remote
keyless entry transmitter will have two buttons
that have a van symbol on them. The van symbol
on the left is for the driver’s side sliding door
and the van symbol on the right is for the
passenger’s side sliding door. Press and hold the
passenger’s or driver’s side button, with the
van symbol on it, to open or close the selected
power sliding door. See Power Sliding Door (PSD)
on page 121.
You can operate the power sliding door(s) with
the remote keyless entry transmitter even if
the power sliding door override switch(es), on the
overhead console, are active or inactive. See
Power Sliding Door (PSD) on page 121 for
additional information.
If the sliding door is closed and the power sliding
door button on the transmitter is pressed and
held, the vehicle’s doors will unlock and then the
power sliding door will open. If the power
sliding door has been locked using the manual
door lock lever, you will need to unlock the power
sliding door before it can be opened with the
keyless entry transmitter sliding door button.
If your vehicle’s fuel filler door is opened,
the driver’s side power sliding door will not open
completely. Do not try to force the door. Once
the fuel filler door is closed, the driver’s side sliding
door can be opened normally.
109