Filter
Top Products
48
Range Setting
Fig. 4-2
Range
Settings
Setup Instructions
If you press
SETUP
once, the first menu item allows you to set the range.
See Fig. 4-2. The range sets the maximum depth the unit will be able to
see. Use the < and > arrows of the Page control pad to select Auto or
Manual range. (If you press
SETUP
while you are looking at the Sidelooker
display, the unit will allow you to set the range for the Sidelooker feature.
See the end of this section.)
Auto range The FishFinder can be set to select the range by itself,
automatically. The unit chooses the shallowest range which
will still include the bottom in the display. If the bottom rises
or falls, the FishFinder will adjust the range to keep the
bottom in the display.
Manual range You can also set the range yourself. (However, if the
bottom rises or falls, the FishFinder will not adjust for this.)
As soon as you select Manual, the cursor will jump down a
line so you can choose the range you want. Use the < and
> arrows of the Page control pad to make a selection. Here
are the choices:
Possible Range Settings (Auto or Manual)
In feet:
5, 10, 20, 30, 50, 80, 100, 150, 250, 400, 600, 1000, 1500, 2000
In fathoms:
2, 3, 5, 10, 15, 20, 25, 30, 50, 80, 100, 150, 200, 350
In meters:
2, 5, 10, 15, 20, 25, 30, 50, 80, 120, 200, 300, 500, 650
If you are done with your setup changes, press the
CLEAR
button to go back
to the normal display. To select the next menu item, press the
V
arrow of the
Page control pad.