Filter
Top Products
54
• 50 kHz dual frequency – The unit will use both frequencies, but the
image on the display will be generated using the information from the
wider 50 kHz beam.
If you are using one of the dual frequency choices, some of the fish may
be revealed by one beam, but not the other. If a fish is detected by the
narrow 200 kHz beam, the symbol for that fish will appear solid. Any fish
which are detected by the wider 50 kHz beam will have fish symbols
which are hollow.
If you are done with your setup changes, press the
CLEAR
button to go back
to the normal display.
To select the next menu item, press the
V
arrow of
the control pad.
Resetting the Log
Fig. 4-8
Resetting
the Log
Setup Instructions
The “log” measures how far the boat has traveled through the water. The
log records the distance traveled since it was last reset. You can reset the
log at any time using the display shown in Fig. 4-8.
Distance reading
The number inside the box shows the distance reading now
being displayed by the unit. To reset the log to zero, press
either the < or the > arrows of the Page control pad.
If you are done with your setup changes, press the
CLEAR
button to go back
to the normal display.
To go back to the menu item for Range Setting,
press the
V
arrow of the Page control pad.